Passenger's Power Window Motor Test
Passenger's Power Window Motor Test1. Remove the door panel, and disconnect the connectors.
2. Test the motor in each direction by connecting battery power and ground to the passenger's power window switch 8P connector according to the table.
3. If the motor does not run or fails to run smoothly, Go to step 4.
4. Disconnect the 6P connector (A) from the passenger's power window motor (B).
5. Check for continuity between the passenger's power window switch 8P connector No. 7 and No. 8 terminals and the passenger's power window motor 2P connector No. 1 and No. 2 terminals.
6. If the wire harness is OK, replace the appropriate power window motor.