CD, DVD, and PC Card Removal/Installation
CD, DVD, and PC Card Removal/InstallationIf the displays Open and Close buttons do not work, you must manually open the display to remove the customer's Navigation DVD, CD and possibly their PC card. Follow the step below.
1. Remove the navigation unit from the vehicle.
2. On the bench, carefully pull the display (A) straight out (about 1/2 inch).
3. Fold down the display as shown in the diagram above.
4. Push the PC Card eject button (A) to eject the customer's PC card (if installed). Power is not required for this function.
5. Remove the plastic lid (B) over the navigation DVD slot.
6. With the display open, temporarily reconnect the unit in the dash (to power it up).
7. Push the CD "eject" button (C), and navigation DVD "eject" button (D) (the button is behind the plastic cover and works only when the unit is powered) and remove the discs (hold the discs by their edges to avoid fingerprints). To avoid scratches, place the navigation DVD and the customer's CD in a jewel case if available.
8. Re-attach the plastic lid that hides the navigation DVD slot.
9. Close the display by first returning the display to the upward position, and then pushing the entire display straight back into the unit.
10. After installing the new navigation unit, re-insert the navigation DVD, the customer's CD, and the PC card.