Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2007 >> Civic L4-1.3L Hybrid >> Repair and Diagnosis >> Transmission and Drivetrain >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - CVT >> Transmission Speed Sensor >> Service and Repair >> CVT Input Shaft (Drive Pulley) Speed Sensor Replacement

CVT Input Shaft (Drive Pulley) Speed Sensor Replacement

CVT Input Shaft (Drive Pulley) Speed Sensor Replacement
1. Remove the air cleaner assembly and the air intake duct.
2. Disconnect the CVT input shaft (drive pulley) speed sensor connector, then remove the CVT input shaft (drive pulley) speed sensor (A).





3. Install the new O-ring (B) on the new CVT input shaft (drive pulley) speed sensor, then install the CVT input shaft (drive pulley) speed sensor in the transmission housing.
4. Check the connector for rust, dirt, or oil, then connect the connector securely.
5. Install the air cleaner assembly and the air intake duct.
pro multis · About Operation CHARM