Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2007 >> Civic Si L4-2.0L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Sensors and Switches - Computers and Control Systems >> Accelerator Pedal Position Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Accelerator Pedal Position Sensor: Service and Repair

Accelerator Pedal Module Removal/Installation

REMOVAL




1. Disconnect the accelerator pedal module connector (A), then remove the nuts (B).
2. Push the tab (C).
3. Pry the accelerator pedal module to right and left, and remove the accelerator pedal module (D).

NOTE:
- The APP sensor is not available separately. Do not disassemble the accelerator pedal module.
- If the tab or tab receivers (E) are damaged, pull back the carpet, remove the nut (F), and replace the pedal stop (G).
- If the tabs (H) of the accelerator pedal module are damaged, replace the accelerator pedal module.

INSTALLATION




1. Install the accelerator pedal module.

NOTE: Make sure the tab (A) is secure.

2. Install the nuts (B), then connect the accelerator pedal module connector (C).

NOTE: Make sure that the accelerator pedal module is secure.
pro multis · About Operation CHARM