Hood Latch Release Cable: Service and Repair
Hood Opener Cable ReplacementNOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the body and related parts.
1. Remove these items:
- Front grille cover
- Left front inner fender
- Left kick panel
2. Disconnect the hood opener cable (A) from the hood latch (B) and remove the bolts (C), then remove the hood release handle (D).
3. Using a clip remover, detach the clips (E). Remove the grommet (F) from the body, then remove the hood opener cable from the vehicle. Take care not to bend the cable.
4. Install the cable in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Make sure the hood opens properly and locks securely.