A-Pillar Corner Trim Replacement

A-Pillar Corner Trim Replacement

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.

1. Open the door.




2. Apply protective tape around the body to prevent damage. Carefully insert the appropriate tool from the KTC trim tool set next to the clips, and detach the clips by prying on the A-pillar corner trim (A). Take care not to scratch the body and related parts.
3. Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
4. Hold the trim up, and fit the clips into the holes in the body, then push on the trim until the clips snap into place.