Driver's Pocket

Driver's Pocket Removal/Installation

NOTE:
- Put on gloves to protect your hands.
- Take care not to scratch the dashboard and related parts.




1. Reach under the dashboard, and push on lock tabs (A) to release the cruise control main switch (B), and the VSA OFF switch (C), then remove the cruise control main switch and the VSA OFF switch. Disconnect the connectors (D, E).




2. From under the dash, remove the screws (A, B) securing the driver's pocket (C).
3. While pulling out on the bottom edge of the dashboard (D), remove the pocket.
4. Install the pocket in the reverse order of removal, and make sure the switch connector is plugged in properly.