Power Mirror/Manual Mirror Replacement

Power Mirror/Manual Mirror Replacement

1. Lower the door glass fully.




2. Carefully pry out the mirror mount cover (A) by hand in the sequence shown.




3. On power mirror model: Disconnect the connector (A).
4. While holding the mirror, remove the nuts securing the mirror.




5. Release the hook (A), then remove the mirror (B).
6. Install the mirror in the reverse order of removal, and, note these items:
- Make sure the connector is plugged in properly (power mirror model).
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the cover clip portion into place securely.