Rear Seat-Back Cover Replacement

Rear Seat-back Cover Replacement

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program.

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the body or tear the seat covers.
- Put on gloves to protect your hands.

1. Remove the head restraint.
2. Fold the seat-back forward.







3. Release the hooks (A), and with seat-back loops, unzip the seat-back cover (B) and release the hooks (C). It is not necessary to remove a seat-back bungee cord from the loops if the cover will be reinstalled.




4. Pull back the seat-back cover (A), and release the inside springs (B).




5. Pull out the head restraint guides (A) while pinching the end of the guides, and remove them.




6. Pull back the edge of the seat-back cover (A) all the way around, then release all of the clips (B).
7. Remove the seat-back cover.




8. Install the seat-back cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook, inside spring, and clips.
- Replace any clips you removed with new ones (A). Install them with commercially available upholstery ring pliers (B).