A/T Clutch Pressure Control Solenoid Valve B and C Replacement

A/T Clutch Pressure Control Solenoid Valve B and C Replacement
1. Make sure you have the anti-theft code for the audio system and write down the audio presets.
2. Disconnect the battery negative terminal, then disconnect the battery positive terminal.
3. Remove the battery hold-down bracket, then remove the battery and battery tray.
4. Remove the battery base.
5. Disconnect the A/T clutch pressure control solenoid valve B and C connectors.
6. Remove the mounting bolts, harness clamp bracket (A), and A/T clutch pressure control solenoid valves B and C.





7. Remove the ATF joint pipes (D), O-rings (E), and gasket (F).
8. Check the fluid passage of the A/T clutch pressure control solenoid valve for dust or dirt, and clean the passage.
9. Install a new gasket on the transmission housing, and install the ATF joint pipes.
10. Install new O-rings over the ATF joint pipes.
11. Install A/T clutch pressure control solenoid valves B and C, and harness clamp bracket.
12. Check the A/T clutch pressure control solenoid valve B and C connectors for rust, dirt, or oil, then connect the connectors securely.
13. Install the battery base, battery tray, and battery, then secure the battery with its hold-down bracket.
14. Connect the battery terminals.
15. Enter the anti-theft code for the audio system, then enter the audio presets.
16. Do the power window control unit reset procedure.
17. Set the clock.