Fluid Line/Hose: Service and Repair
ATF Cooler Hose Replacement1. Slide the ATF cooler hoses (A) on the ATF filter (B) until they are 5-7 mm (0.20-0.28 in.) (C) away from the filter housing.
2. Secure the hoses with the clips (D) at 10-12 mm (0.39-0.47 in.) (E) from the filter housing.
3. Slide the ATF cooler hoses (F) over the ATF cooler lines (G), then secure the hoses with the clips at 6-8 mm (0.24-0.31 in.) (I) from the hose ends.
4. Slide the ATF cooler hoses (J) over the ATF cooler lines (K) under the radiator, then secure the hose with the clips (L) at 2-4 mm (0.08-0.16 in.) (M) from the hose ends.
5. Install the hose clamp (N) at the marks (O) on the ATF cooler hoses.