Transmission Fluid Inspection and Replacement

Transmission Fluid Inspection and Replacement
1. Raise the vehicle on the hoist.
2. Remove the filler plug (A) and washer (B), check the condition of the fluid, and make sure it is at the proper level (C).





3. If the fluid is dirty, remove the drain plug (A) and drain the fluid.





4. Reinstall the drain plug with a new washer, and refill the transmission fluid to the proper level.

Fluid Capacity
2WD model:
1.9 L (2.0 US qt) at fluid change
2.15 L (2.3 US qt) at overhaul
4WD model:
1.9 L (2.0 US qt) at fluid change
2.25 L (2.4 US qt) at overhaul

Always use Honda Manual Transmission Fluid (MTF). Using engine oil can cause stiffer shifting because it does not contain the proper additives.
5. Reinstall the filler plug (B) with a new washer.