Wiper Arm: Adjustments
Wiper Arm/Nozzle AdjustmentFRONT
Wiper arms stop position
1. When the wiper arms stop at the automatic stop position, confirm that they are at the standard position.
a. Position at about 0.6 in. (16 mm) from the top of cowl cover (A)
b. Position at about 0.6 in. (16 mm) from the top of cowl cover (A)
Washer nozzle position
2. When you turn on the washers, confirm 50% or more of the washer fluid lands within the spray area. If the spray area is not within the standard positions, adjust the nozzles.
NOTE:
- Spray area on the passenger side is symmetrical.
- X shows the distance from the centerline of the windshield.
- Y shows the distance from the cowl cover.
REAR
Wiper arm stop position
1. When the wiper arm stops at the automatic stop position, confirm that it is are at the standard position,
a. Position at about 1.7 in. (44 mm) from the bottom of the windshield (A).
Washer nozzle position
2. When you turn on the washers, confirm the washer fluid lands within the spray area. If the spray area is not within the standard positions, adjust the nozzles.
b. Position at about 0.6 in. (15 mm) from the top of the windshield (B).