Mainshaft Bearing and Oil Seal Replacement
Mainshaft Bearing and Oil Seal ReplacementSpecial Tools Required
^ Adjustable bearing puller, 25-40 mm 07736-A01000B
^ Attachment, 37 x 40 mm 07746-0010200
^ Attachment, 52 x 55 mm 07746-0010400
^ Driver 07749-0010000
^ Slide hammer, 3/8"-16 commercially available
1. Remove the ball bearing (A) from the clutch housing (B) using the 25 - 40 mm adjustable bearing puller (C) and a commercially available 3/8"-16 slide hammer (D).
2. Remove the oil seal (A) from the transmission side.
3. Drive in the new oil seal from the transmission side using the driver (A) and 37 x 40 mm attachment (B).
4. Drive in the new ball bearing (A) from the transmission side using the driver (B) and 52 x 55 mm attachment (C).
