B1061

DTC B1061: Relay Control Module Lost Communication with Gauge Control Module (A/T message)

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.

1. Clear the DTCs with the HDS.
2. Turn the ignition switch OFF, and then back ON (II).
3. Wait for 6 seconds or more.

4. Check for DTCs with the HDS.

Is DTC B1061 indicated?

YES - Go to step 5.

NO - Intermittent failure, the communication line is OK at this time.

5. Check for DTCs with the HDS.

Are DTCs B1008, B1808, B1956, B2011, and B2061 also indicated?

YES - Go to gauge control module input test. Gauge Control Module Input Test

NO - Go to relay control module input test. Relay Control Module Input Test