B2060

DTC B2060: Right Power Sliding Door Control Unit Lost Communication with Gauge Control Module (VSP/NE Message)

NOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.

1. Clear DTCs with the HDS.
2. Turn the ignition switch OFF, and then back ON (II).
3. Wait for 6 seconds or more.
4. Check for DTCs with the HDS.

Are DTCs B1060, B1205, B1357, B1805, B2010, and B2060 indicated?

YES - Go to gauge control module input test. Gauge Control Module Input Test

NO - Go to right power sliding door control unit input test. Control Unit Input Test