Driver's Dashboard Outer Panel

Driver's Dashboard Outer Panel Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard and related parts.
- Put on gloves to protect your hands.




1. Open the front door, and remove the dashboard side cover (A).
1. Gently pull out along the front edge to release the hooks (B).
2. Gently pull out on the side cover to release the hooks (C), then remove the side cover.




2. Push the bottom hook (A) back by hand, and pull out the bottom of the outer panel.




3. Gently pry up on the driver's dashboard outer panel (A) to detach the clips and release the hook (B), then pull out the panel.
4. Disconnect the moonroof switch connector (C), power sliding door main switch connector (D), adjustable pedal switch connector (E), then remove the panel.
5. Install the outer panel in the reverse order of removal, and note these items:
- Make sure each connector is plugged in properly.
- Push the clips into place securely.