Passenger Assist Handle: Service and Repair

Grab Handle Removal/Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program

NOTE: Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.




1. Lower the grab handle, then pry out the caps (A). Remove the self-tapping ET screws, then remove the grab handle (B). Remove the remaining grab handles.




2. Install the grab handle in the reverse order of removal, and note these items:
- If the side curtain airbag has deployed, replace the grab handles with new ones.
- To prevent the side curtain airbags from deploying improperly and possibly causing injury, inspect removed grab handle and replace it if it has any deformations in the grab handle (A).