Third Row Seat Cover
Third Row Seat Cover ReplacementSpecial Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
- Take care not to tear the seams or damage the seat covers.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Put on gloves to protect your hands.
Seat-back cover
1. Remove the third row seat.
2. Remove the seat-back cover/pad from the seat frame.
3. Pull back the edge of the seat-back cover (A) all the way around, and release the clips (B) and fasteners (C), then remove the seat-back cover.
4. Install the seat-back cover in the reverse order of removal, and note these items:
- To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hook and clips.
- Using commercially available upholstery ring pliers (A), replace all of the clips you removed with new ones (B).
Seat Cushion Cover
1. Remove the third row seat.
2. Remove the seat cushion cover/pad from the seat frame.
3. Release the clips (A) from under the seat cushion (B).
4. Pull back the edge of the seat cushion cover (A) all the way around, and release the clips (B), then remove the seat cushion cover.
5. Install the cover in the reverse order of removal, and note these items:
- To prevent wrinkles, make sure the material is stretched evenly over the pad before securing all the clips.
- Replace the clips fastening the seat cushion mat and the cushion frame with new ones.
- Using commercially available upholstery ring pliers (A), replace all of the clips you removed with new ones (B).