Third Row Seat-Back Recline Cable
Third Row Seat-back Recline Cable ReplacementSpecial Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to bend or kink the cables.
- Take care not to kink or scratch the interior trim.
- Put on gloves to protect your hands.
1. Remove the third row seat.
2. Reassemble the left seat-back frame and left seat cushion frame.
3. Remove the screws, then remove the protector (A).
4. Remove the screws, then remove the recline outer upper cover (A) and recline inner cover (B) (both seats).
5. Right third row seat: Remove the screws, then remove the recline inner upper cover (A).
6. Disconnect the left seat-back recline cable (A), right seat-back recline cable A (B), or right seat-back recline cable B (C). Release the wire ties (D) fastening each cable on the seat-back frame (E).
7. Release the wire tie (A) fastening the left seat-back recline cable (B) or right seat-back recline cable A (C) on the seat cushion frame (D), then remove the cable.
8. Install the cables in the reverse order of removal, and note these items:
- Make sure each seat-back recline cable is connected securely.
- Check the seat-back recline operations.