J35A7 Engine

Rocker Arm Assembly Removal

Front
1. Remove the cylinder head cover.
2. Loosen the locknuts and adjusting screws (A).





3. Remove the bolts and the rocker arm assembly.
- 1 Loosen the rocker shaft mounting bolts two turns at a time, to prevent damaging the valves or rocker arm assembly.
- 2 When removing the rocker arm assembly, do not remove the rocker shaft mounting bolts. The bolts will keep the springs and the rocker arms on the shafts.





Rear
1. Remove the cylinder head cover.
2. Loosen the locknuts and adjusting screws (A).





3. Remove the bolts and the rocker arm assembly.
- 1 Loosen the rocker shaft bridge mounting bolts and rocker shaft holder mounting bolts two turns at a time, to prevent damaging the valves or rocker arm assembly.
- 2 When removing the rocker arm assembly, do not remove the rocker shaft bridge mounting bolts and rocker shaft holder mounting bolts. The bolts will keep the rocker arms on the shafts.