J35A7 Engine

Cylinder Head Cover Removal

Front
1. Remove the intake manifold.
2. Remove the three ignition coils from the front cylinder head.
3. Remove the dipstick.
4. Remove the two bolts (A) securing the harness holder, and remove the harness clamp (B).





5. Remove the front cylinder head cover.





Rear
1. Remove the intake manifold.
2. Remove the three ignition coils from the rear cylinder head.
3. Disconnect the three injector connectors, rocker arm oil control solenoid connector, and engine oil pressure (EOP) sensor connector from the rear cylinder head.
4. Remove the power steering hose bracket mounting bolt (A), the harness holder mounting bolts (B), and the engine ground cable bolt (C).





5. Remove the engine ground cable (E) and breather hose (D).
6. Remove the harness (F) from the upper cover.
7. Remove the rear cylinder head cover.