Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Air Bag Control Module: Testing and Inspection
OPDS Unit InitializationWhen a seat-back cover, seat-back cushion, and/or OPDS unit is replaced, initialize the OPDS by following the procedure.
NOTE: A new (un-initialized) OPDS unit installed with a faulty OPDS sensor can cause DTC 85-71.
1. Erase the DTC memory (see "Erasing the DTC Memory").
2. Make sure the front passenger's seat is dry. Set the seat-back in a normal position, and make sure there is nothing on the seat.
3. Make sure the ignition switch is OFF and the MES connector is not shorted.
4. Connect the HDS to the DLC (A).
5. Turn the ignition switch ON (II).
6. Make sure the HDS communicates with the vehicle and the SRS unit. If it does not communicate, troubleshoot the DLC circuit.
7. From the HDS Main Menu, select SRS, then SRS, then Adjustments. In the Adjustment Menu, select OPDS UNIT. Follow the screen prompts to initialize the OPDS.
8. Turn the ignition switch OFF.
9. Disconnect the HDS from the DLC.
NOTE: If the OPDS system fails to initialize after several attempts, replace the OPDS sensor/seat-back and,retry. If the OPDS system continues to fail to initialize, replace the OPDS unit.