Operation CHARM: Car repair manuals for everyone.

Interior - Driver's Memory Seat Inoperative

07-080

November 14, 2007

Applies To:
2007 Odyssey - From VIN 5FNRL388.7B114384 thru 5FNRL388.7B123130

Driver's Position Memory System Does Not Work

SYMPTOMS

Seat memory button 1 does not work:

^ You cannot program seat position button 1.

^ When you press seat position button 1,the light in the button does not come on.

^ You press seat memory button 2, and the seat moves, then you press seat memory button 1, and the seat does not move.

PROBABLE CAUSE

There is a loose terminal, pin 13, in connector C632 in driver's door wire harness A.

CORRECTIVE ACTION

Replace driver's door wire harness A.

PARTS INFORMATION

Driver's Door W~re Harness A:
P/N 32751-SHJ-A61, H/C 8417388

WARRANTY CLAIM INFORMATION





In warranty:
The normal warranty applies.

Failed Part: P/N 32751-SHJ-A61
H/C 8417388

Defect Code: 08003

Symptom Code: 01201

Skill Level: Repair Technician

Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone Office. You must request consideration, and get a decision, before starting work.

DIAGNOSIS

1. Remove the driver's door panel:

^ Refer to page 20-8 of the 2007 Odyssey Service Manual, or

^ Online, enter keywords DOOR PANEL REM, and select Front Door Panel Removal/Installation from the list.





2. Remove the vapor barrier.





3. Using a flashlight, inspect terminal No. 13 (the BLU wire) of connector C632. Gently tug on the BLU wire to check if the terminal is loose in the connector.

^ If terminal No. 13 is loose, install the new door wire harness.





^ If terminal No. 13 is OK, continue with normal troubleshooting.

4. Install all of the removed parts in the reverse order of removal.

NOTE:

^ Make sure the vapor barrier is installed properly and that it is sealed around its outside perimeter.

^ Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.

^ Make sure the windows and the power door locks operate properly.

5. Check the driver's position memory system for proper operation.





Disclaimer