Shift Solenoid Valve Removal and Installation
Shift Solenoid Valve Removal and InstallationNOTE: Do not hold the solenoid valve connector to remove and install the solenoid valve. Be sure to hold the solenoid valve body.
1. Remove the mounting bolts, then remove the solenoid valves by holding the solenoid valve body.
2. Install the new 0-rings (E) on each solenoid valve.
NOTE: A new solenoid valve comes with new 0-rings. If you install a new solenoid valve, use the new 0-rings provided on it.
3. Install shift solenoid valve D (black connector) by holding the shift solenoid valve body; be sure the mounting bracket contacts the accumulator body.
4. Install shift solenoid valve A (black connector) by holding the shift solenoid valve body; be sure the mounting bracket contacts the accumulator body.
5. Install shift solenoid valve C (brown connector) by holding the shift solenoid valve body; be sure mounting bracket contacts the bracket of shift solenoid valve A.
NOTE: Do not install shift solenoid valve C before installing shift solenoid valve A. If shift solenoid valve C is installed before installing shift solenoid valve A, it may damage to hydraulic control system.
6. Install shift solenoid valve B (brown connector) by holding the shift solenoid valve body; be sure the mounting bracket contacts the accumulator body.