Body Emblem: Service and Repair

Emblem Replacement

NOTE: When removing the emblems, take care not to scratch the body.

1. Remove the screws securing the "H" emblems:
- To remove the front "H" emblem, remove the front bumper.
- To remove the rear "H" emblem, remove the rear license trim.

2. Use a piece of string to cut through the adhesive tape on the emblem.
3. Clean the body surface with a sponge dampened with isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the surface.
4. Apply the emblems where shown.