Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Driver's Switch Panel
Driver's Switch Panel Removal/InstallationSpecial Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool end Equipment Program.
NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard and related parts.
1. Remove the driver's switch panel (A).
1. Using a flat-tip screwdriver, pry out the bottom portion of the panel to detach the clips.
2. Pull out the panel to release the upper hooks (B), then remove the panel.
3. Disconnect the cruise control main switch connector (C), and interior lights switch connector (D) and moonroof switch connector (E).
2. Install the panel in the reverse order of removal, and note these items:
- Make sure each connector is plugged in properly.
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips and hooks into place securely.