Right Middle Panel

Right Middle Panel Removal/ Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program

NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take cafe not to scratch the dashboard and related parts.

1. Remove these items:
- Instrument panel
- Center panel




2. On the passenger's side of the dashboard, remove the dashboard side lid (A).
1. Remove the front door opening trim (B), as necessary.
2. Gently pull out along the rear edge to release the clips and hooks (C).
3. Gently pull out on the lid to release the top and bottom clips and the hooks (D), then remove the lid.




3. Remove the screws securing the middle panel (A).




4. Remove the middle panel (A).
1. On the outside edge of the dashboard.
2. On the passenger's side, gently pull out along the top and bottom edges of the panel to detach the clips.
3. On the driver's side, gently pull out on the panel to release the clips.

5. Install the panel in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips and hooks into place securely.