Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Front Seat Disassembly/Reassembly - Driver's Manual Height Adjustable
Front Seat Disassembly/Reassembly - Driver's Manual Height AdjustableSpecial Tools Required
KTC trim tool set SOJATP2O14 *
* Available through the American Honda Tool and Equipment Program.
SRS components are located in this area. Review the SRS component locations and the precautions and procedures before doing repairs or service.
The operation of the driver's seat position sensor must be checked after any of these procedures:
- Driver's seat position sensor replacement
- Cover plate (front side of driver's seat slide rail) replacement
NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Route the seat wire harness correctly.
- Make sure the bushing and pivot washer are installed correctly.
- Apply multipurpose grease to the moving portion of the seat track.
- To prevent wrinkles in the seat-back cover, stretch the material evenly over the pad.