Cylinder Head Cover Removal

Cylinder Head Cover Removal
FRONT
1. Remove the intake manifold.
2. Remove the three ignition coils from the front cylinder head.





3. Remove the two bolts (A) securing the harness holder, and remove the dipstick (B).





4. Remove the front cylinder head cover.

REAR
1. Remove the intake manifold.
2. Remove the three ignition coils from the rear cylinder head.
3. Disconnect the three injector connectors, rocker arm oil control solenoid connector, and rocker arm oil pressure switch connector from the rear cylinder head.





4. Remove the three bolts (A) securing the harness holder.
5. Remove the breather hose (B) and ground cable (C).





6. Remove the rear cylinder head cover.