Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2007 >> Pilot 2WD V6-3.5L >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Variable Valve Timing Solenoid >> Service and Repair >> Variable Cylinder Management (VCM) System

Variable Cylinder Management (VCM) System

Rocker Arm Oil Control Solenoid (VTEC Solenoid Valve)/Rocker Arm Oil Control Solenoid (VTEC Solenoid Valve) Filter Replacement

1. Remove the engine cover.




2. Disconnect the rocker arm oil control solenoid (VTEC solenoid valve) 2P connector (A) and the EOP sensor 3P connector (B).
3. Remove the rocker arm oil control solenoid (VTEC solenoid valve) assembly (C) from the rear bank cylinder head, and check the rocker arm oil control solenoid (VTEC solenoid valve) filter (D) for clogging. If it is clogged, replace the solenoid valve filter, the engine oil filter, and the engine oil.
4. Install the parts in the reverse order of removal.
pro multis · About Operation CHARM