Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Troubleshooting Intermittent Failures
Troubleshooting Intermittent FailuresIf there was a malfunction, but it does not recur, it will be stored in the memory as an intermittent failure, and the SRS indicator may come on depending on this malfunction detected.
NOTE: Check the condition of the battery, cables, conditions, and the charging system. Low battery voltage may cause some intermittent failures.
After checking the DTC, troubleshoot as follow
1. Make sure the ignition switch is OFF.
2. Connect the HDS to the DLC (A).
3. Turn the ignition switch ON (II).
4. Read the DTC.
5. Erase the DTC memory.
6. Set the parking brake, then start the engine, and let it idle.
7. The SRS indicator comes on for about 6 seconds and then goes off.
8. Shake the related wire harness and the connectors, and check for loose connections, pinfits, and poor grounds.
9. Take a test-drive (quick acceleration, quick braking, and cornering), turn the steering wheel fully left and right, and hold it there for 5 to 10 seconds. If the problem recurs, the SRS indicator will come on.
NOTE: Faculty cable reel can cause intermittent DTCs related to the driver's airbag.
10. If you cannot duplicate the intermittent failure, the system is OK at this time.