Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2007 >> Pilot 4WD V6-3.5L >> Repair and Diagnosis >> Relays and Modules >> Relays and Modules - Restraints and Safety Systems >> Air Bag Control Module >> Service and Repair >> SRS Unit Replacement
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

SRS Unit Replacement

SRS Unit Replacement

Removal

1. Disconnect the negative cable from the battery, and wait at least 3 minutes before beginning work.
2. Disconnect both seat belt tensioner connectors.
3. Remove the center console side trim.




4. Pull down the console carpet on the driver's side and passenger's side, then disconnect the connectors. Remove the TORX bolts a, then pull out the SRS unit.

Installation




1. Install the new SRS unit (A) with TORX bolts (B), then connect the connectors to the SRS unit push them into position until it clicks.

NOTE: Be sure the SRS unit is sitting squarely against its bracket before torquing the TORX bolts.

2. Reinstall the center console side trim.
3. Reconnect both seat belt tensioner connectors.
4. Reconnect the negative cable to the battery.
5. Initialize the ODS unit.

NOTE: Initialization is only needed if you installed a new SRS unit.

6. After installing the SRS unit, confirm proper system operation Turn the ignition switch ON (II) the SRS indicator should come on for about 6 seconds and then go off.
pro multis · About Operation CHARM