DTC 51

DTC 51, 53, 55, 57: Tire Pressure Sensor Registration Error

NOTE: Before you begin troubleshooting, determine the actual location of the TPMS wheel sensor on the vehicle using the tire pressure sensor location procedure.

1. Turn the ignition switch to ON (II).
2. Check for DTCs with the HDS.
3. Note the tire pressure sensor(s) number by the indicated DTC.





4. Turn the ignition switch to LOCK (0).
5. Make sure all four wheels are TPMS wheels with properly mounted tire pressure sensors. If necessary substitute known-good TPMS wheels.
6. Turn the ignition switch to ON (II).
7. Clear the DTC with the HDS.
8. Memorize the tire pressure sensor IDs with the HDS.
9. Test-drive the vehicle. Drive the vehicle at 28 mph (45 km/h) for 1 minute or more.
10. Check for DTCs with the HDS.

Is DTC 51, 53, 55, or 57 indicated?

YES - Check for loose terminals and poor connections at the TPMS control unit. If necessary, substitute a known-good TPMS control unit, and recheck.

NO - Replace the appropriate tire pressure sensor.