DTC 86-1x

DTC 86-1x ("x" can be 0 thru 9 or A thru F): Faulty OPDS Seat-Back Sensor

DTC 86-2x ("x" can be 0 thru 9 or A thru F): Faulty OPDS Seat Support Sensor

NOTE: Before doing this troubleshooting procedure, review SRS Precautions and Procedures and General Troubleshooting Information.

1. Clear the DTC memory.
2. Read the DTC.

Is DTC 85-1x or 85-2x indicated?

YES - Go to step 3.

NO - Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures. Troubleshooting Intermittent Failures If another DTC is indicated, troubleshoot the DTC.

3. Check the connection between the ODS unit harness 18P connector (A) and the ODS unit.






Is the connection OK?

YES - Go to step 4.

NO - Repair the poor connection, and clear the DTC.

4. Replace the front passenger's seat-back cover/pad.
5. Initialize the ODS unit.
6. Clear the DTC memory.
7. Read the DTC.

Is DTC 86-1x or 86-2x indicated?

YES - Replace the ODS unit.

NO - Intermittent failure, the system is OK at this time. Go to Troubleshooting Intermittent Failures. Troubleshooting Intermittent Failures If another DTC is indicated, troubleshoot the DTC.