Power Windows
DTC U1282: Door Multiplex Control Unit Lost Communication with Driver's MICUNOTE: If you are troubleshooting multiple DTCs, be sure to follow the instructions in B-CAN System Diagnosis Test Mode A.
1. Clear the DTCs with the HDS.
2. Turn the ignition switch to LOCK (0) and then back to ON (II).
3. Wait for 6 seconds or more.
4. Check for DTCs with the HDS.
Is DTC U1282 indicated?
YES - Go to the driver's MICU input test, and do all power, ground and communication input tests. MICU Input Test If the tests prove OK, replace the driver's under-dash fuse/relay box.
NO - Intermittent failure, the system is OK at this time. Check for loose or poor connections at driver's under-dash fuse/relay box connector P (20P) and the related units.