Operation CHARM: Car repair manuals for everyone.
Home >> Honda >> 2008 >> Accord L4-2.4L >> Repair and Diagnosis >> Body and Frame >> Mirrors >> Testing and Inspection >> Power Mirrors >> Front Passenger's Power Window Switch Input Test
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Front Passenger's Power Window Switch Input Test

Front Passenger's Power Window Switch Input Test

1. Turn the ignition switch to LOCK (0), open and close the driver's door, then remove the front passenger's (passenger's) power window switch.
2. Disconnect the 37P connector (A) from the front passenger's (passenger's) power window switch (B).






3. Inspect the connector and socket terminals to be sure they are all making good contact.
- If the terminals are bent, loose, or corroded, repair them as necessary, and recheck the system.
- If the terminals look OK, go to step 4.

4. Reconnect the connector to the front passenger's power window switch, turn the ignition switch to ON (II), and make these input tests at the connector.
- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, go to step 5.






5. Turn the ignition switch to LOCK (0), open and close the driver's door, then disconnect the 37P connector from the front passenger's power window switch again.
6. With the connector still disconnected, make these input tests at the connector.
- If any test indicates a problem, find and correct the cause, then recheck the system.
- If all the input tests prove OK, replace the front passenger's power window switch, and go to step 7.






7. With the front passenger's power window AUTO UP/AUTO DOWN function, reset the power window control unit.
pro multis · About Operation CHARM