Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Motor Test

Motor Test

1. Remove the driver's seat.
2. Remove the power seat adjustment switch knobs and the recline cover from the seat.
3. Disconnect the 12P connector (A) from the power seat adjustment switch (B).






4. At the 12P connector of the driver's seat wire harness side, test the motor by applying battery power and ground to the terminals according to the table.






5. If the motor does not run or fails to run smoothly, go to step 6.
6. Disconnect the 2P connector from each motor.

NOTE:
- For the recline motor, remove the seat-back cover.
- All connector views are wire side of female terminals.






7. Check for continuity between each motor 2P connector and the driver's seat wire harness 12P connector. If there is continuity, replace the appropriate motor:

NOTE: The front and rear up-down motors are part of the up-down adjuster.