Traction Control Switch: Testing and Inspection
VSA OFF Switch Test1. Turn the ignition switch to LOCK (0).
2. Remove the driver's dashboard lower cover.
3. Push out the VSA OFF switch (A) from the driver's dashboard lower cover.
4. Check for continuity between the VSA OFF switch 5P connector terminals No. 1 and No. 2. There should be continuity when the switch is pressed, and no continuity when the switch is released.
5. Check for continuity between VSA OFF switch 5P connector terminals No. 4 and No. 5. There should be continuity at all times.
6. Install the VSA OFF switch in the reverse order of removal.