Interior Light Switch Test/Replacement
Interior Light Switch Test/ReplacementWith moonroof
NOTE: The interior light switch is built into the moonroof switch, and it switches the front individual map light OFF and DOOR positions.
1. Remove the front individual map lights.
2. Disconnect the moonroof switch 12P connector (A) and the map light 3P connector (B).
3. Remove the moonroof switch (C) from the map light housing.
4. At the moonroof switch 12P connector, check for continuity between the No. 9 and No. 7 terminals.
- There should be continuity when the interior light switch is in the DOOR position.
- There should be no continuity when the interior light switch is in the OFF position.
5. If the continuity is not as specified, replace the moonroof switch assembly.
6. Install the parts in the reverse order of removal.