DTC 113

DTC 113: Yaw Rate-lateral Acceleration Sensor (Power Supply)

1. Turn the ignition switch to LOCK (0).
2. Disconnect the yaw rate-lateral acceleration sensor 4P connector.
3. Turn the ignition switch to ON (II).
4. Measure the voltage between yaw rate-lateral acceleration sensor 4P connector terminal No. 1 and body ground.





Is there battery voltage?

YES - Replace the yaw rate-lateral acceleration sensor.

NO - Repair open in the wire between the No. 4 (7.5 A) fuse in the under-dash fuse/relay box and the yaw rate-lateral acceleration sensor.