Body Emblem: Service and Repair

Emblem/Sticker Replacement

NOTE: When removing the emblem/sticker, take care not to scratch the body.

1. To remove the front "H" emblem, remove the front upper grille.
2. To remove the rear "H" emblem, remove the rear license trim.
3. Clean the body surface with a sponge dampened in isopropyl alcohol. After cleaning, keep oil, grease, and water from getting on the surface.
4. Apply the emblems/sticker where shown. When installing the ULEV sticker on the inside surface of the left quarter glass, align the sticker with the edge of the black ceramic as shown, then press the sticker into place, and remove the application tape.
5. After installing the front "H" emblem, reinstall the front upper grille.
6. After installing the rear "H" emblem, reinstall the rear license trim.