Center Upper Dashboard Panel Removal/Installation
Center Upper Dashboard Panel Removal/InstallationSpecial Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard and related parts.
1. Remove the center upper dashboard panel (A).
1. Apply protective tapes (B) on the dashboard panel next to the center upper dashboard panel. Pry the middle edge of the panel up with a flat-tip screwdriver (C) wrapped with protective tape.
2. While carefully lifting the panel with a flat-tip screwdriver, insert the trim tool (D) into the gap between the dashboard and the panel. Use the trim tool to gently pry the panel up partially to release the hooks (E) and clips (F), then pull the panel up to release the clips (G).
2. Install the panel in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips and hooks into place securely.