Dashboard Centre Trim Removal/Installation

Dashboard Center Trim Removal/ Installation

Special Tools Required
KTC trim tool set SOJATP2014 *
*Available through the American Honda Tool and Equipment Program

NOTE:
- Put on gloves to protect your hands.
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the dashboard and related parts.

1. Remove these items:
- Center upper dashboard panel
- Dashboard center vent
- HVAC control unit
- Driver's vent panel
- Passenger's vent panel
- Shift lever panel
- Instrument panel
- Front passenger's airbag
- Navigation display unit, with navigation system
- Audio unit

2. Remove the screws.
3. Gently pull out the dashboard center trim (A) to release the clips, then remove the trim.






4. Install the trim in the reverse order of removal, and note these items:
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.