Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (This is the last day we'll be asking)
Power Mirror Replacement
Power Mirror ReplacementSpecial Tools Required
KTC trim tool set SOJATP2014 *
* Available through the American Honda Tool and Equipment Program
NOTE:
- Use the appropriate tool from the KTC trim tool set to avoid damage when prying components.
- Take care not to scratch the door and related parts.
1. Raise the door glass fully.
2. Pry up on the edge of the mirror mount cover (A) with a trim tool to detach the clips (B), and gently pull out the cover to detach the pin (C) from the door.
3. Remove the front door panel.
4. Disconnect the connector (A).
5. Remove the nuts.
6. While holding the mirror (A), pull the harness (B) out through the hole in the door. Take care not to scratch the door.
7. Install the mirror in the reverse order of removal, and note these items:
- Make sure the connector is plugged in properly.
- Check if the clips are damaged or stress-whitened, and if necessary, replace them with new ones.
- Push the clips into place securely.