Traction Control Switch: Testing and Inspection

VSA OFF Switch Test

1. Turn the ignition switch to LOCK (0).
2. Remove the power mirror switch (A), then disconnect the VSA OFF switch 5P connector (B).





3. Push out the VSA OFF switch (C) from the back of the switch panel.
4. Check for continuity between the VSA OFF switch 5P connector terminals No. 1 and No. 2. There should be continuity when the switch is pressed, and no continuity when the switch is released.





5. Check for continuity between the VSA OFF switch 5P connector terminals No. 4 and No. 5. There should be continuity at all times.