Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Tire Pressure Module: Service and Repair
TPMS Control Unit ReplacementNOTE: Make sure the TPMS control unit mounting bracket is not bent or twisted as this may affect its communication with the tire pressure sensors.
1. Make sure the ignition switch in LOCK (0).
2. Remove both sides of the front console covers.
3. Remove the dashboard center lower cover.
4. Disconnect the TPMS control unit connector (A).
5. Remove the TPMS control unit (B) from the bracket (C).
NOTE: While separating the TPMS control unit from the bracket, release the hook (D) on the TPMS control unit using a flat-tipped screwdriver (E), and push up to release it from the bracket.
6. Install the TPMS control unit in the reverse order of removal.
NOTE: Make sure the TPMS control unit is properly installed. You will hear a click when the TPMS control unit is securely mounted on the bracket.
7. Connect the HDS, and memorize the pressure sensor IDs using the TPMS sensor initializer tool.