Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
SRS Unit Replacement
SRS Unit ReplacementREMOVAL
NOTE: If you are only disconnecting SRS unit connector A, skip step 2.
1. Disconnect the negative cable from the battery, then wait for 3 minutes before starting work.
2. Disconnect both seat belt tensioner connectors and both seat belt buckle tensioner connectors .
3. Remove the dashboard center lower cover.
4. Disconnect SRS unit connector A (28P), SRS unit connector B (28P), and remove the TORX bolts (C), then remove the SRS unit.
INSTALLATION
1. Install the new SRS unit (A) with new TORX bolts (B), then connect the connectors (C) to the SRS unit-push them into position until they click.
NOTE: Be sure the SRS unit is sitting squarely against its bracket before torquing the TORX bolts.
2. Reconnect both seat belt tensioner connectors and seat belt buckle tensioner connector.
3. Reconnect the negative cable to the battery.
4. After installing the SRS unit, confirm proper system operation: Turn the ignition switch to ON (II); the SRS indicator should come on for about 6 seconds and then go off.
5. Reinstall all removed parts.