Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Transmission Mode Switch: Testing and Inspection
D3 Switch Test1. Remove the center lower covers.
2. Disconnect the D3 switch/park pin switch/T gear position indicator panel light connector.
3. Push the D3 switch several times, and check the switch for continuity between D3 switch/park pin switch/T gear position indicator panel light connector terminals No. 5 and No. 6. There should be toggled continuity and no continuity between terminals every time the D3 switch is pushed.
4. D3 switch test is finished if the test result is OK. If the D3 switch works incorrectly at the D3 switch/park pin switch/A/T gear position indicator panel light connector, test the D3 switch at the D3 switch 2P connector.
5. Remove the shift lever.
6. Remove the D3 switch 2P connector from the connector holder, and disconnect it.
7. Push the D3 switch several times, and check the switch for continuity between D3 switch 2P connector terminals No. 1 and No. 2. There should be toggled continuity and no continuity between terminals every time the D3 switch is pushed.
8. Replace the D3 switch if the switch works incorrectly.
9. Replace the D3 switch connector harness, the A/T gear position indicator panel light harness, and the park pin switch as a set if the switch is OK. The D3 switch connector harness is not available from the A/T gear position indicator panel light harness and the park pin switch.
10. Connect the 2P connector, and install it in the holder.
11. Install the shift lever.
12. Install the center lower covers.