Low Tire Pressure Indicator Does Not Go Off, and No DTCs Are Stored

Low tire pressure indicator does not go off, and no DTCs are stored

1. Turn the ignition switch OFF.
2. Disconnect TPMS control unit connector B (20P).
3. Turn the ignition switch ON (II).
4. Check the low tire pressure indicator for several seconds when the ignition switch is turned ON (II).

Did the indicator come on and then go off?

YES - Check for loose terminals and poor connections at the TPMS control unit. If necessary, substitute a known-good TPMS control unit, and recheck.

NO - Do the troubleshooting for the gauge control module. If necessary, substitute a known-good gauge control module, and recheck.